• 3D Printing Jigs, Fixtures & Other Manufacturing Tools

    The fundamental objectives of manufacturing — improve quality, decrease cycle time and reduce costs — are the Read More
  • 3D Printing: Modular Prototype Production With Lasers

    Siemens and the Fraunhofer Institute have developed a faster production process based on selective laser Read More
  • Rolling With Additive Manufacturing In The Automotive Sector

    Automotive manufacturers are under great pressure to develop vehicles which are due to go into Read More
  • Voice Of The Industry: Is Now The Time To Try Direct Digital Manufacturing?

    Scott Crump, chairman and chief innovation officer of Stratasys explains how direct digital manufacturing, otherwise Read More
  • Where Are You Going Industry 4.0?

    When Industry 4.0 took off in Germany it rapidly made it to the headlines. With Read More
  • Stronger Turbine Blades With Molybdenum Silicides

    Researchers at Kyoto University have found that molybdenum silicides can improve the efficiency of turbine Read More
  • Enhancing Engine Performance With Thermal Spray Coating (Part II)

    In Part II of "Enhancing Engine Performance With Thermal Spray Coating", Paulo ES Rosa, manager, Read More
  • Enhancing Engine Performance With Thermal Spray Coating (Part I)

    The advantages of using aluminium alloy engine blocks over cast iron blocks can be augmented Read More
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
14 October 2016

Kasto’s new fully automatic band saw, the Kastowin pro AC 5.6, is optimised for bimetallic and carbide blades and can be applied in areas such as the steel trade, steel production, forging mills, machine manufacturing and the automotive industry.

Read more...
02 November 2016

The FZ33 Compact Portal Milling Machine has a Y-axis that travels up to 4,000 mm, with a Z-axis of up to 1,500 mm. This machine is suited for the machining of small and medium sized components for the aeronautical and automobile industries, tool and mould making, and other special applications.

Read more...
31 October 2016

Vernet Behringer’s HD-S 412 compact drilling-milling machine is dedicated to small/medium-sized steel fabricators looking for a versatile machine with compact footprint. It can also be used by larger companies that require an additional line for lighter profiles (400 x 300 mm capacity).

Read more...
28 October 2016

Hardox is a wear-resistant steel already known for its hardness and toughness. SSAB, the Nordic and US-based steel company, has extended the Hardox family with the introduction of the HiTemp wear plate.

Read more...
26 October 2016

This VMC features standard ball-screw cooling and a highly rigid left-right mobile trunnion table that supports high precision and cutting power.

Read more...
24 October 2016

The CS700E Tool Management Centre allows grinding of profile forms on finish milling cutters of up to 700 mm in diameter. Cutters with up to 29 blades can be sharpened, while the cutter indexing process is carried out automatically. The maximum profile height is 120 mm.

Read more...
21 October 2016

Esab’s latest welding system, the Rebel EMP 215ic features multi-process arc performance, location flexibility, portability and an easy to use operator interface.

Read more...
19 October 2016

For industries ranging from offshore to plastics to metal forming, developing application-specific, modular machines is the ultimate goal. The way to achieve that goal is with optimised drive technologies. Electric solutions such as Rexroth’s IndraDrive ML can provide an alternative, especially when high power outputs are required.

Read more...
17 October 2016

5ME’s Freedom 4.0 updates the Freedom eLOG software, focusing on manufacturing efficiency, including asset utilisation, performance, quality and OEE.

Read more...
13 October 2016

Multidraw PL 61 SE by Zeller+Gmelin is suitable for the basic oiling of all steel surfaces from the rolling mill and helps to reduce zinc abrasion during the forming process of hot-dip galvanised surfaces.

Read more...
14 October 2016

Kasto’s new fully automatic band saw, the Kastowin pro AC 5.6, is optimised for bimetallic and carbide blades and can be applied in areas such as the steel trade, steel production, forging mills, machine manufacturing and the automotive industry.

Read more...
02 November 2016

The FZ33 Compact Portal Milling Machine has a Y-axis that travels up to 4,000 mm, with a Z-axis of up to 1,500 mm. This machine is suited for the machining of small and medium sized components for the aeronautical and automobile industries, tool and mould making, and other special applications.

Read more...
31 October 2016

Vernet Behringer’s HD-S 412 compact drilling-milling machine is dedicated to small/medium-sized steel fabricators looking for a versatile machine with compact footprint. It can also be used by larger companies that require an additional line for lighter profiles (400 x 300 mm capacity).

Read more...
28 October 2016

Hardox is a wear-resistant steel already known for its hardness and toughness. SSAB, the Nordic and US-based steel company, has extended the Hardox family with the introduction of the HiTemp wear plate.

Read more...
26 October 2016

This VMC features standard ball-screw cooling and a highly rigid left-right mobile trunnion table that supports high precision and cutting power.

Read more...
24 October 2016

The CS700E Tool Management Centre allows grinding of profile forms on finish milling cutters of up to 700 mm in diameter. Cutters with up to 29 blades can be sharpened, while the cutter indexing process is carried out automatically. The maximum profile height is 120 mm.

Read more...
21 October 2016

Esab’s latest welding system, the Rebel EMP 215ic features multi-process arc performance, location flexibility, portability and an easy to use operator interface.

Read more...
19 October 2016

For industries ranging from offshore to plastics to metal forming, developing application-specific, modular machines is the ultimate goal. The way to achieve that goal is with optimised drive technologies. Electric solutions such as Rexroth’s IndraDrive ML can provide an alternative, especially when high power outputs are required.

Read more...
17 October 2016

5ME’s Freedom 4.0 updates the Freedom eLOG software, focusing on manufacturing efficiency, including asset utilisation, performance, quality and OEE.

Read more...
13 October 2016

Multidraw PL 61 SE by Zeller+Gmelin is suitable for the basic oiling of all steel surfaces from the rolling mill and helps to reduce zinc abrasion during the forming process of hot-dip galvanised surfaces.

Read more...
14 October 2016

Kasto’s new fully automatic band saw, the Kastowin pro AC 5.6, is optimised for bimetallic and carbide blades and can be applied in areas such as the steel trade, steel production, forging mills, machine manufacturing and the automotive industry.

Read more...
02 November 2016

The FZ33 Compact Portal Milling Machine has a Y-axis that travels up to 4,000 mm, with a Z-axis of up to 1,500 mm. This machine is suited for the machining of small and medium sized components for the aeronautical and automobile industries, tool and mould making, and other special applications.

Read more...
31 October 2016

Vernet Behringer’s HD-S 412 compact drilling-milling machine is dedicated to small/medium-sized steel fabricators looking for a versatile machine with compact footprint. It can also be used by larger companies that require an additional line for lighter profiles (400 x 300 mm capacity).

Read more...
28 October 2016

Hardox is a wear-resistant steel already known for its hardness and toughness. SSAB, the Nordic and US-based steel company, has extended the Hardox family with the introduction of the HiTemp wear plate.

Read more...
26 October 2016

This VMC features standard ball-screw cooling and a highly rigid left-right mobile trunnion table that supports high precision and cutting power.

Read more...
24 October 2016

The CS700E Tool Management Centre allows grinding of profile forms on finish milling cutters of up to 700 mm in diameter. Cutters with up to 29 blades can be sharpened, while the cutter indexing process is carried out automatically. The maximum profile height is 120 mm.

Read more...
21 October 2016

Esab’s latest welding system, the Rebel EMP 215ic features multi-process arc performance, location flexibility, portability and an easy to use operator interface.

Read more...
19 October 2016

For industries ranging from offshore to plastics to metal forming, developing application-specific, modular machines is the ultimate goal. The way to achieve that goal is with optimised drive technologies. Electric solutions such as Rexroth’s IndraDrive ML can provide an alternative, especially when high power outputs are required.

Read more...
17 October 2016

5ME’s Freedom 4.0 updates the Freedom eLOG software, focusing on manufacturing efficiency, including asset utilisation, performance, quality and OEE.

Read more...
13 October 2016

Multidraw PL 61 SE by Zeller+Gmelin is suitable for the basic oiling of all steel surfaces from the rolling mill and helps to reduce zinc abrasion during the forming process of hot-dip galvanised surfaces.

Read more...

Machine Tool Videos

  • Bystronic - Euroblech2016
  • Iscar - Tech Talk
  • The Kennametal Story

APMEN

 

 

As Asia's number one English metalworking magazine, Asia Pacific Metalworking Equipment News (APMEN) is a must-read for professionals in the automotive, aerospace, die & mould, oil & gas, electrical & electronics and medical engineering industries.