Yes, it is fast, but while fast-cutting speeds open up the potential, there are still the upstream and downstream manufacturing processes to consider. By Oliver Hergt, corporate communications, Bystronic

With Industry 4.0, there is now an increasing trend towards digitalisation in industrial environments. This is the second part of "The Digital Transformation" by Bystronic’s head of development (CTO) Dr Jürgen Hohnhaus where he talks about the benefits behind this development. By Oliver Hergt with photos by Manuel Stettler.

With Industry 4.0, there is now an increasing trend towards digitalisation in industrial environments. Bystronic’s head of development (CTO) Dr Jürgen Hohnhaus talks about the benefits behind this development. By Oliver Hergt with photos by Manuel Stettler.

The concept of punching designates a slitting process in which a sheet is severed in one stroke while shapes such as round holes are created in the part, and external contours are cut with single strokes. Punching specialist Trumpf takes a swing at explaining the methodologies and innovations of punching.

The current state of technology adoption in regards to additive manufacturing was discussed by a group of business and technology leaders at the High Tech Campus in Eindhoven, The Netherlands in October 2015. By Saswitha de Kok, senior consultant, and Corwin van Heteren, senior manager, PricewaterhouseCoopers.

Eddy Lek, product marketing manager, Asia Pacific, Faro Technologies explores five ways that 3D measurement improves quality and productivity for the automotive industry.

“Fibernomics” (as coined by Bystronic), describes an all-encompassing economic principle which seeks to give the competitive advantage in today’s sheet metal fabrication environment. It begins with the company’s fibre laser cutting system. Contributed by Oliver Hergt, editor corporate communications, Bystronic.

Lester Lee, regional marketing manager, Hypertherm Asia Pacific, Mary Allen, IP protection manager, Hypertherm Inc, Sanjay Kumar, consumables sales manager, Hypertherm India give their thoughts on counterfeits and what manufacturers need to know when purchasing plasma torch consumables.

Tex Whiting, consumable sales manager for Hypertherm explains to us about the many forms of plasma cutting under different conditions and how to get the best out of it.

The transformation in three dimensional measuring technology as well as shape inspection using optical methods, which set in years ago, is constantly setting new standards in shorter and shorter cycles. Contributed by Witte Asia

Yes, it is fast, but while fast-cutting speeds open up the potential, there are still the upstream and downstream manufacturing processes to consider. By Oliver Hergt, corporate communications, Bystronic

With Industry 4.0, there is now an increasing trend towards digitalisation in industrial environments. This is the second part of "The Digital Transformation" by Bystronic’s head of development (CTO) Dr Jürgen Hohnhaus where he talks about the benefits behind this development. By Oliver Hergt with photos by Manuel Stettler.

With Industry 4.0, there is now an increasing trend towards digitalisation in industrial environments. Bystronic’s head of development (CTO) Dr Jürgen Hohnhaus talks about the benefits behind this development. By Oliver Hergt with photos by Manuel Stettler.

The concept of punching designates a slitting process in which a sheet is severed in one stroke while shapes such as round holes are created in the part, and external contours are cut with single strokes. Punching specialist Trumpf takes a swing at explaining the methodologies and innovations of punching.

The current state of technology adoption in regards to additive manufacturing was discussed by a group of business and technology leaders at the High Tech Campus in Eindhoven, The Netherlands in October 2015. By Saswitha de Kok, senior consultant, and Corwin van Heteren, senior manager, PricewaterhouseCoopers.

Eddy Lek, product marketing manager, Asia Pacific, Faro Technologies explores five ways that 3D measurement improves quality and productivity for the automotive industry.

“Fibernomics” (as coined by Bystronic), describes an all-encompassing economic principle which seeks to give the competitive advantage in today’s sheet metal fabrication environment. It begins with the company’s fibre laser cutting system. Contributed by Oliver Hergt, editor corporate communications, Bystronic.

Lester Lee, regional marketing manager, Hypertherm Asia Pacific, Mary Allen, IP protection manager, Hypertherm Inc, Sanjay Kumar, consumables sales manager, Hypertherm India give their thoughts on counterfeits and what manufacturers need to know when purchasing plasma torch consumables.

Tex Whiting, consumable sales manager for Hypertherm explains to us about the many forms of plasma cutting under different conditions and how to get the best out of it.

The transformation in three dimensional measuring technology as well as shape inspection using optical methods, which set in years ago, is constantly setting new standards in shorter and shorter cycles. Contributed by Witte Asia

Yes, it is fast, but while fast-cutting speeds open up the potential, there are still the upstream and downstream manufacturing processes to consider. By Oliver Hergt, corporate communications, Bystronic

With Industry 4.0, there is now an increasing trend towards digitalisation in industrial environments. This is the second part of "The Digital Transformation" by Bystronic’s head of development (CTO) Dr Jürgen Hohnhaus where he talks about the benefits behind this development. By Oliver Hergt with photos by Manuel Stettler.

With Industry 4.0, there is now an increasing trend towards digitalisation in industrial environments. Bystronic’s head of development (CTO) Dr Jürgen Hohnhaus talks about the benefits behind this development. By Oliver Hergt with photos by Manuel Stettler.

The concept of punching designates a slitting process in which a sheet is severed in one stroke while shapes such as round holes are created in the part, and external contours are cut with single strokes. Punching specialist Trumpf takes a swing at explaining the methodologies and innovations of punching.

The current state of technology adoption in regards to additive manufacturing was discussed by a group of business and technology leaders at the High Tech Campus in Eindhoven, The Netherlands in October 2015. By Saswitha de Kok, senior consultant, and Corwin van Heteren, senior manager, PricewaterhouseCoopers.

Eddy Lek, product marketing manager, Asia Pacific, Faro Technologies explores five ways that 3D measurement improves quality and productivity for the automotive industry.

“Fibernomics” (as coined by Bystronic), describes an all-encompassing economic principle which seeks to give the competitive advantage in today’s sheet metal fabrication environment. It begins with the company’s fibre laser cutting system. Contributed by Oliver Hergt, editor corporate communications, Bystronic.

Lester Lee, regional marketing manager, Hypertherm Asia Pacific, Mary Allen, IP protection manager, Hypertherm Inc, Sanjay Kumar, consumables sales manager, Hypertherm India give their thoughts on counterfeits and what manufacturers need to know when purchasing plasma torch consumables.

Tex Whiting, consumable sales manager for Hypertherm explains to us about the many forms of plasma cutting under different conditions and how to get the best out of it.

The transformation in three dimensional measuring technology as well as shape inspection using optical methods, which set in years ago, is constantly setting new standards in shorter and shorter cycles. Contributed by Witte Asia